Got my Eyes and Tape mesurment today at a 2017 Model .
It is in fact 40 mm lower then the 2013-2016 model .
And there are more changes.
The Fork is 40 mm shorter , must be internal depend the upper Fork Tubes are the same leng .
The Fork has also new Dust seals .
And a new Front axle with internal hex and is flush with the Fork now.
The Shock has now a black spring .
What seems to be harder then in the older model , two up (europen) the bike did not dive as much as my one with the stock spring .
The Dog Bone is 5 mm longer as on the older Model , what lower the rear end . Under the rear fender i messure also -40 mm to the stock 2014 model.
Could not messure the shock lengt.
Kickstand is shorter too.
And there are some more changes .
Dash has now a rev Counter .
Shifter now with a hinge.
But Break is still without one .
new Header and Muffler with much bigger Pipe diameter .
And the Lamda sensor is now in the Header next to the Oil Filler Cap and not in the CylinderHead Exhoust Port . The opening there is gone means new Head.
The new Lamda Probe is a different Type with more then one Wire and with the different location that means a different wirering loom and i guess
a new not compatible ECU . The ECU has also a new location (could not find it )
The black Plastic Part arount the Cooling Water expansion tank has now Cooling Air Slots for the Recifier and the space of the ECU on the 2013-2016 model is emty . Also the Bank angle sensor has a new position (behind the Horn ) means the subframe under the right shroud is different .
And a new Tail light .
